Cooper's Strip Club Shop

New Zealand

Flusher Refills

The finishing rinse that makes "no sanding" true.

Cooper's Flusher is the final step of the Cooper's Stripping System. It dilutes the softened paint, varnish and Stripper residue left after stripping so it all wipes away cleanly - leaving nothing but the original surface, ready for its new finish. Because Flusher contains no water, it won't raise the grain on timber or rust metal, and once the surface is fully dry, you can refinish straight away, with no sanding (provided no previous surface damage is present).

Stocking up on Stripper too? Stripper Refills are here

How Much Flusher Does Your Project Need?

Cooper's Flusher rinses approximately 8 m² per litre (actual surface rinsed):

Refill	Rinses approx.
0.5L	4 m²
1L	8 m²
2L	16 m²
5L	40 m²
10L	80 m²
20L	160 m²
30L	240 m²
40L	320 m²
50L	400 m²

Rule of thumb: allow roughly 1 litre of Flusher for every 2 litres of Stripper on your project. So if you're ordering a 5L Stripper refill, the 2L or 5L Flusher has you covered; a 20L Stripper job pairs with 10L of Flusher. Not sure? Call 0800 678 678 or email us photos of your project and one of our experts will size it for you, free.

Why the Rinse Matters

All the effort of stripping is only as good as the surface you're left with. Residue left behind can interfere with your new paint, varnish or oil - Flusher is formulated to dissolve it and carry it all away. And because it's completely waterless, it protects the two things water would ruin: